Product Description
Small Pitch Roller Chains
Type: PC 35, PC 40, PC50, PC60
Materials: POM+ stainless steel
Pitch: 6.35mm, 9.525mm, 12.7mm, 15.875mm, 19.05mm
Color: White
We are manufacturer professionally in plastic top chains, stainless steel top chains, and other conveyor components. We have abtained the quality certificate of ISO 9001: 2000, and our products have been sold to Europe, Middle East, America and many other coutries and regions.
| type | PC 35, PC 40, PC50, PC60 |
| Materials | POM+ stainless steel |
| Pitch | 6.35mm, 9.525mm, 12.7mm, 15.875mm, 19.05mm |
Small Pitch Roller Chains
Type: PC 35, PC 40, PC50, PC60
Materials: POM+ stainless steel
Pitch: 6.35mm, 9.525mm, 12.7mm, 15.875mm, 19.05mm
Color: White
Advantages: short pitch, low noise, light weight,
corrosion resistance, diamagnetic.
Plasic roller chains can be widely use for eletronic, food,medicine, chemical industry etc.
We are manufacturer professionally in plastic top chains, stainless steel top chains, and other conveyor components. We have abtained the quality certificate of ISO 9001: 2000, and our products have been sold to Europe, Middle East, America and many other coutries and regions.
Our products application:
Packaging and conveying industry
Beverage bottling and handling industry
Food and meat processing industry
Chemical industry
Pharmaceuticals industry
Automobile industry
Electrical and electronics industry
Textile industry
Light engineering industry
| Material: | Plastic |
|---|---|
| Structure: | Roller Chain |
| Surface Treatment: | No |
| Chain Size: | 12.7mm |
| Feature: | Wear Resistant |
| Structure (for Chain): | Roller Chain |
| Samples: |
US$ 1/Piece
1 Piece(Min.Order) | |
|---|
| Customization: |
Available
| Customized Request |
|---|
How do roller chains handle high humidity environments?
Roller chains are designed to withstand a wide range of environmental conditions, including high humidity environments. Here’s a detailed answer to the question:
1. Corrosion Resistance: Roller chains can be manufactured using corrosion-resistant materials such as stainless steel or with special coatings that provide protection against rust and corrosion. These features help the chain withstand the effects of high humidity, which can cause moisture to come into contact with the chain surface.
2. Lubrication: Proper lubrication is essential in high humidity environments to prevent moisture from penetrating the chain and causing corrosion. Lubricants with water-resistant properties or specifically designed for humid conditions can be used to provide a protective barrier on the chain’s surfaces, minimizing the impact of moisture.
3. Seal Options: Some roller chains come with additional sealing elements, such as O-rings or X-rings, that provide an extra layer of protection against moisture ingress. These seals help keep the lubrication inside the chain and prevent contaminants from entering, reducing the risk of corrosion.
4. Maintenance Practices: Regular maintenance is crucial in high humidity environments to ensure the longevity of roller chains. Cleaning the chain to remove any accumulated moisture, dirt, or debris and applying appropriate lubrication at recommended intervals help mitigate the effects of humidity on the chain’s performance and lifespan.
5. Proper Storage: When not in use, roller chains should be stored in a dry and controlled environment to prevent prolonged exposure to high humidity. Using appropriate storage methods, such as sealed containers or dehumidified storage areas, can help preserve the chain’s integrity and minimize the risk of corrosion.
By considering these factors and implementing proper maintenance practices, roller chains can effectively handle high humidity environments, ensuring their reliable performance and extended lifespan.
How do roller chains handle backstop or anti-reverse motion?
Roller chains are capable of handling backstop or anti-reverse motion through the use of specific chain attachments or additional components. Here’s a detailed answer to the question:
Backstop or anti-reverse motion is the ability of a system to prevent or control the reverse movement of a load. In applications where roller chains are required to handle backstop or anti-reverse motion, the following methods can be employed:
1. One-Way Clutch: A one-way clutch mechanism can be integrated into the system to allow the roller chain to transmit power in one direction while preventing reverse movement. This mechanism typically consists of a set of sprags or rollers that engage with the sprocket teeth in one direction and disengage in the reverse direction.
2. Ratchet and Pawl System: Another approach is the use of a ratchet and pawl system, where the roller chain is connected to a ratchet wheel with pawls that engage with the teeth of the wheel in one direction, allowing power transmission, and prevent reverse movement when the load tries to rotate in the opposite direction.
3. Overrunning Clutch: An overrunning clutch, also known as a freewheel, can be employed to allow the roller chain to transmit power in one direction and disengage in the reverse direction. This allows for smooth operation in applications where backstop or anti-reverse motion is required.
These mechanisms effectively enable the roller chain to handle backstop or anti-reverse motion by allowing power transmission in one direction and preventing reverse movement. The specific mechanism used depends on the application requirements and the desired level of control over the motion.
It’s important to consult the manufacturer’s guidelines and specifications when implementing backstop or anti-reverse motion in roller chain applications to ensure proper selection and installation of the appropriate mechanisms.
How do you properly lubricate a roller chain?
Proper lubrication is crucial for the performance and longevity of a roller chain. Here’s a detailed answer to the question:
1. Clean the Chain: Before lubricating the roller chain, ensure that it is clean and free from dirt, debris, and old lubricant. Use a suitable cleaning agent or solvent to remove any contaminants.
2. Select the Right Lubricant: Choose a high-quality lubricant specifically designed for roller chains. Consider factors such as the operating conditions, load capacity, speed, and temperature range when selecting the lubricant. Consult the manufacturer’s recommendations for the appropriate lubricant type and viscosity.
3. Apply the Lubricant: Apply the lubricant evenly to the entire length of the roller chain. You can use a lubrication system, brush, or spray applicator for effective coverage. Ensure that the lubricant penetrates between the rollers and bushings, as well as the pins and inner plates.
4. Remove Excess Lubricant: After applying the lubricant, remove any excess oil or grease from the chain. Excessive lubrication can attract dirt and debris, leading to accelerated wear and chain failure. Wipe off any excess lubricant using a clean cloth.
5. Reapply Lubricant Regularly: Roller chains require regular lubrication to maintain optimal performance. The frequency of lubrication depends on the operating conditions and the manufacturer’s recommendations. In general, lubrication should be done at regular intervals or when the chain shows signs of dryness or wear.
6. Monitor and Inspect: Regularly monitor the condition of the lubricated roller chain. Look for any signs of wear, rust, or inadequate lubrication. If necessary, reapply the lubricant or adjust the lubrication frequency based on the chain’s performance and operating conditions.
Proper lubrication helps reduce friction, wear, and heat generation, ensuring smooth operation and extending the life of the roller chain. Following the manufacturer’s recommendations and best practices for lubrication will help maintain the chain’s performance and prevent premature failure.
editor by CX 2023-10-27
China best Agricultural Chains for Agricultural Machine bush roller chain drive
Product Description
Combine chains
ZGS38 combine chains with attachments
A, CA, C, S type steel agricultural chains
If you interested with our products, plesae feel free to contact us.
| Usage: | Transmission Chain |
|---|---|
| Material: | Alloy |
| Surface Treatment: | Polishing |
| Feature: | Heat Resistant |
| Chain Size: | 1/2"*3/32" |
| Structure: | Roller Chain |
| Samples: |
US$ 1/Meter
1 Meter(Min.Order) | |
|---|
| Customization: |
Available
| Customized Request |
|---|
What is a drive chain?
A drive chain is a wheeled device that transmits power from one gear to another. The drive chain is usually an oval ring around a corner or worm gear. On the other hand, idler pulleys do not transmit power and are not used to move the chain. In some cases, drive chains can be used with idler pulleys to transport objects. This allows the drive chain to recover some power from the second gear.
conveyor chain
There are many types of conveyor chains to choose from. One type is a closed joint chain. It consists of the barrel and connecting rod, made from a single casting and heat-treated for high strength and durability. Conveyor chains typically have low running speeds and are typically made of malleable iron. Another type of chain is the power transmission chain, which is used to transmit mechanical power. They feature efficient lubrication and are stronger than conventional conveyor chains.
Roller chain pitches can range from half an inch to a third of an inch. They are available in steel and nickel-plated steel. They can be used with inline or staggered rollers and can be designed with different pitch levels. They can also have bushings between the chainplates or gaps between the teeth to increase their maximum spacing. When choosing a conveyor chain, remember to properly lubricate bearing surfaces to minimize power absorption, wear, and corrosion. Mineral oils of medium viscosity are suitable for normal operating temperatures. SAE 20W50 is suitable. Manufacturers also offer self-lubricating chains.
Conveyor chains are used in many industries. The automotive industry has traditionally used these chains for bulk transport. Their reliability and low cost make them an excellent choice for a variety of applications. CZPT Chains offers stainless steel and CZPT conveyor chains to meet your unique requirements. If you’re in the market for a new conveyor, don’t forget to shop around. CZPT Chain can help you find the perfect one.
The regular drive version consists of an ASME/ANSI roller chain wrapped around a driven sprocket. It can also be configured for variable rpm. The gear ratio between the two parts determines the reduction or increase in speed. In some cases, solution chains can be used. Roller chains are more efficient. Then, there are solutions for both cases. There are many types of conveyor chains to choose from.
Conveyor chain pitch also plays an important role in performance. The smaller the pitch of the chain, the faster it spins. On the other hand, a smaller pitch will require more teeth on the sprocket, which means more links will be engaged during the movement. This smaller articulation angle also produces smoother motion. It also reduces vibration. Therefore, CZPT Chains can be trusted for a long time.
roller chain
The performance of a drive chain depends on how well it is maintained and lubricated. Careful attention to detail is required when selecting a roller chain, which is one of the most important components in a drive chain. Its proper lubrication and assembly will significantly affect its wear life. Here are some important tips to follow when buying a roller chain:
The size of the drive chain should be selected according to the sprockets used. The large sprocket should have at least 25 teeth, and the small sprocket should have fewer teeth. The pitch of a drive chain is the contact angle between the chain and the sprocket. The smaller the sprocket, the smaller the contact angle of the two parts. Larger sprockets are better, but smaller sprockets must never have fewer teeth.
When purchasing a roller chain, be sure to consider the maximum speed of the small sprocket. This will determine how much lubrication you need. Different lubrication systems have different requirements. Manual lubrication limits how many feet per minute the drive chain can run, while oil bath lubrication can get you up to 1100 ft/min. The only way to maximize drive chain speed is to purchase a pump lubrication system.
Once you have the right length, you can determine if you need a new one. To do this you have to move the axis to measure the length. Once the length is determined, the drive chain should be removed from the sprocket and measured using the ANSI specified measuring load. You should also follow safety guidelines when measuring your chain. If you want to maximize the life of your drive chain, be sure to follow these tips.
Another important consideration is the type of environment you operate in. For applications that need to avoid rubbing steel rails, it is best to use a roller chain that can withstand a clean indoor environment. Although roller chains are generally more durable, they must be stored properly to avoid corrosion. If you care about the environment, consider opting for double chain. Its durability and low maintenance costs will make it a valuable investment in your business.
closed pivot
Closed-end pivot drive chains are used in a variety of applications. They are known for their durability, high strength, and long life. They are available in a variety of grades, including grade 400, grade 600, and grade 800 pivots, which can withstand the high forces required for certain applications. Enclosed pivot chains can be used to lift, pull, convey and transfer heavy loads.
Class 400 closed-end pivot chain features one-piece cast offset link construction. Steel pins connect each link and are prevented from rotating by head stops. This design allows the pin to connect inside the barrel without breaking. This type of chain is the most commonly used and has the highest durability. In addition to being extremely durable, it offers long-lasting performance and smooth operation.
Another closed-end pivot conveyor chain drive is called a power drive chain. These chains consist of barrels and links used to transmit rotation from one shaft to another. The barrels of the closed-end pivot chains are made of steel, which allows them to run easily on the sprockets. Block drive chains are used for low-speed applications, but they can be noisy when the chain is in contact with the sprockets.
The enclosed pivot drive chain has rollers on both ends to minimize wear. These chains are usually made of steel and can be used in areas where high-speed power transmission is required. They are also available in heavy-duty versions. Unlike other types of chains, steel pivot chains are designed for a variety of applications. They are suitable for heavy-duty applications and their open barrel design allows for minimal contact with the pins in the barrel and the root of the sprocket.
Linear chain
CZPT is an important part of linear drive technology. This type of chain is capable of delivering real power in tight spaces. Typically, loads are moved by pulling or pushing. CZPT can perform both types of movements. They can push and pull additional loads. This type of chain can also be wound and stored in the magazine. It is a popular choice for small machine tools and many other uses.
Unlike traditional mechanical chains, CZPT uses a push-pull strategy to move heavy objects. It is a rigid locking design that prevents kinking and allows the chain to transmit force without bending. The CZPT is an excellent choice for moving large loads and is particularly versatile in power transmission. However, CZPT is more expensive than traditional drive chain options.
The service life of a linear chain depends on its design, material type and size. You may want to buy a good quality chain, but it’s not necessary in all cases. While superior quality can extend the life of the chain, it may not be necessary for low-speed drives or very light shock loads. If you’re not dealing with high-velocity shock loads, you probably don’t need features like oil reservoirs or bushing grooves.
The size of the drive sprocket can have a major impact on the overall life of the linear chain. It determines how fast the chain can go and how much horsepower it can produce. An 11-tooth chain will hit about half its rated speed, but only about 30 percent of its rated horsepower. You can extend the life of your linear chain by choosing a drive sprocket with a higher number of teeth. It is best to choose a drive sprocket with a high number of teeth, but make sure the number of teeth is even. This will ensure that your chain wear is evenly distributed.
editor by CX 2023-04-18
China OEM DS-810 Post bed sewing machine with high quality
Applicable Industries: Garment Shops, Manufacturing Plant, Retail
Condition: New
Type: Industrial Sewing Machine
Stitch Formation: –
Mechanical Configuration: –
Max. Sewing Thickness: 15mm
Stitch Length: 7mm
Power: 550W
Overall Dimensions: 650*260*570mm
Feed Mechanism: Manual
Warranty: 1 Year
Key Selling Points: smooth and quiet
Core Components: Motor
Weight (KG): 35 KG
Operation: Manual
Features: HIGH-SPEED
After-sales Service Provided: Overseas third-party support available
Certification: CE/ISO9001
Brand: Dison
Model: DS-810
G.W: 35kgs
Packing: Carton Box
packing size: 65*27*56cm
Needle: Singer Needle
Sewing Speed: 2500rpm
Function: Shoe Border Stitching Machine
Packaging Details: Carton package by each machine
Port: HangZhou / ZheJiang
Product description：Single-needle post bed sewing machine;It adopts sliding bar thread.Take-up and vertical rotary hook.Push- button stitch regulator and lever style back-sewing device,make the machineoperatong easily It is designed with post-bed and provided with roller persser foot to performsewing at wide space under arm.The machine suitable for sewing shoes,bags and hats etc.
Detailed Images Packing & Delivery Company Profile FAQ 1. who are we?HangZhou Dison Machiner Co., Ltd is a highly reputed professional manufacturer exporter of all kinds of high quality sewing machine integrating with Research & Hot Sale Auto Spare Parts Transmission Front Propeller Driving Shaft Assy Development, Manufacture and Marketing Located in HangZhou.2. how can we guarantee quality?Always a pre-production sample before mass production, Always final Inspection before shipment. 3.what can you buy from us? Lockstitch machine, Overlock machine, Interlcok machine, Button amounting machine, Button holing machine, Bar-tacking machine, Adult Electric ATV 4X4 Quad For Adults 4000W Heavy-duty machine, Cutting machine, Sewing machine motor and Spare parts,etc. 4. why should you buy from us not from other suppliers? Dison is an industrial &trade company with 8 years experience in producing and export garment equipment. Located in HangZhou City.Zheiiang Province.China. We are specialized in manufacturing of many kinds of Sewing Machines and Embroidery Machines. 5. what services can we provide? Accepted Delivery Terms: FOB.CFR.CIF.EXW; Accedted Payment Currency:USD.EUR.CNY; Accepted Payment Type:T/TL/C.D/P D/A.MonevGram.Western Union; Lanquage Spoken:English.chinese.
What to look for in a roller chain
There are many different factors to consider when purchasing a roller chain. One of the most important factors is tensile strength, which represents the force required to break the chain. Roller chains are available in three different tensile strengths: minimum, average and ultimate. Each strength reflects a different limit to the load the chain can handle. However, these limits are not always equal and you should be aware of the differences between roller chains.
Canonical chain
Most roller chains have standard sizes printed on the side panels. This is usually “40” or “C2080H”, but can also be the letter “B”. If the chain is old, it will need to be cleaned to see its size. You can find the size on the standard roller chain size chart, but not everyone is marked. To determine the size, measure the diameter and pitch of the chain, then compare the results to the chart to see what size you need.
Heavy-duty roller chains are available with heat-treated pins, side plates, and rollers. In addition to being heat treated, they are also factory pre-stretched, which reduces wear on these parts. If properly maintained, they can last for years, reducing the risk of failure or corrosion. Depending on the application, standard roller chains are available in different sizes. It can be purchased separately. There are several options to choose from, depending on the size and strength of the application.
PEER roller chains contain solid rollers to reduce shock loads on the sprocket teeth. Heat treating and preloading all components of the PEER chain helps minimize initial elongation. Hot-dip lubrication ensures complete lubrication of all chain components, extending their life and reducing maintenance costs. For heavy-duty applications, ASME/ANSI-B29.1 chain is a good choice.
Standard roller chains are made of steel or alloy steel. However, it can be made of other materials such as stainless steel. In addition to steel, stainless steel is often used in food processing machinery where chain lubrication is an issue. Brass and nylon are also sometimes used. However, they are not that popular. Therefore, you should always check with your supplier before purchasing. By comparing the tensile strength of two different chains and making an informed decision, you can get the best price and service.
Chain without bushing
Bushless roller chains have advantages over conventional roller chains. Unlike conventional chains, bushless chains have extensive lateral flexibility, which increases the chain’s lubrication flow. The inner plates of bushless chains have protruding shoulders so the oil can flow through them more easily and efficiently. This is an important characteristic of a smooth-running chain. Additionally, bushless chains may have improved shifting performance.
The strength of a bushingless roller chain is measured in terms of tensile strength and fatigue strength. The former measures the load a chain can withstand before breaking. Fatigue strength is equally important, and factors that affect fatigue strength include the steel used to make the chain components, the pitch hole fabrication, the type of shot peening on the chain, and the design and thickness of the chain. For example, if the chain is too thin, it may not be enough for heavy-duty applications.
Like traditional roller chains, bushingless roller chains have two different types of links. The inner link has two inner plates connected by pins, while the outer chain has two outer plates held together by bushings. A bushingless roller chain is similar to a traditional chain, except it eliminates a step in the assembly process by stamping the tube into the inner plate. So if you want a smoother ride, a bushingless roller chain is a better choice.
There are two different sizes of bushingless roller chains. One size is designed for use with standard single-strand chains, while the other size is designed for use with double-strand or triple-strand chains. Bushless chains are generally shorter than conventional chains, so they can fit in tighter spaces. Bushless chains are made of the highest quality materials. These chain attachments are case hardened for optimum strength and durability.
Mute chain
The silent roller chain has a smooth, low-noise drive. They are made of stacked rows of flat chainplates with a gear-like profile that meshes with the sprocket teeth. Each chainplate is attached to a corresponding sprocket, which also allows the chain to bend. While these basic components are the same for every silent roller chain, there are many variations that allow them to be used in a variety of applications.
The most popular high-speed transmission, silent chains feature gear-like sprockets. They can be made from single or multiple strands of material. Single-strand chains are less expensive than multi-strand chains, but they tend to wear out faster if not lubricated. Single-strand roller chains can be used for years without lubrication, but for your application, wide silent chains are still worth considering.
The design and construction of silent chains make them ideal for conveying a wide variety of products. They have flat, heat-resistant surfaces. They are also durable and non-slip. They are available in a variety of pitch sizes, widths, and mounting styles. Whether you need chains for general purpose conveyors or glass bottle transport applications, we have you covered. Ask about the benefits of silent roller chain conveyors.
Inverted tooth chains are another option for quieter chains. These chains are designed to reduce noise from engine-related friction. Silent chains are more common, and manufacturers have fallen in love with them. A silent chain consists of several links connected to the sprocket teeth. Teeth rotate to reduce noise, vibration, and chord action. These are the main reasons why silent chains are so popular.
ANSI chain pitch
To measure your bike’s chain pitch, you can use a caliper. This measurement is taken from the center of the rolling pin to the center of the next rolling pin. Chains come in many sizes, but ANSI is the most common chain standard in the United States. A caliper is handy if you’re not sure which size to buy, as it allows you to check for worn sprockets.
Chains that meet ANSI standards will be characterized by a certain pitch. This measurement is based on the width and spacing of the roll. The spacing is usually greater than the width. The standard number will be the right number for the width of the chain or the left number for the rollers. The number on the left indicates whether the chain is lightweight or heavyweight. Heavyweight chains are designated by the suffix “H”.
Common chain sizes are based on ANSI chain pitch. Pitch is the minimum distance between bushing and sprocket. The smaller the chain pitch, the greater the total distance between the two points. This means the chain will last longer. However, if you are buying a chain for a specific application, you should check the pitch carefully as it can affect the performance of the chain.
Roller chain wear measurement
The purpose of roller chain wear measurement is to prevent breakage by monitoring the strain on the chain. There are several ways to measure roller chain wear. The first is to remove the chain from its working position and measure the distance from the sprocket to its measuring end. Another way is to measure the pitch of the chain or the distance between two pins. This method is superior to other methods because it is convenient and accurate.
When measuring the wear of a roller chain, it is important to note that the elements of the chain will gradually deform. About 3.75% of the total wear will be on the pins and the rest will be on the internal links. These wear measurements will vary based on the nominal pitch of the chain and the amount of friction the chain is experiencing. Proper lubrication between pins and bushings, load and frequency of articulation all affect wear rates.
It is important to measure the amount of wear on the roller chain to avoid excessive machine failures. The longer the chain runs, the more wear it will wear. Although the length of the chain should be less than the center distance, the excessive load will cause premature wear. Therefore, lubrication is essential. Additionally, the sag of the chain should not exceed 2% to 4% of its center-to-center distance. Finally, check for unusual noise or visible defects. A common cause of excessive roller chain wear is the size of the load. Every chain manufacturer sets a maximum workload for its product.
There are several ways to measure roller chain wear. If using a high-speed drive, it should have at least 11 teeth, and a medium-speed drive should have at least 25 teeth. Also, be sure to check the length of the chain, even if you should. The same goes for the pin diameter, which should be the same or different pitch as the roller chain.
4X8FT made in China – replacement parts – in Calabar Nigeria CNC Router 1325 Wood Carving Machine for Wooden Doors, Sculpture, Cabinets, Soft Metal with ce certificate top quality low price
We – EPG Group the bigge EPT Chain and agricultural gearbox manufacturing unit in China with 5 different branches. For a lot more particulars: Cell/whatsapp/telegram/Kakao us at: 0086~13083988828 13858117778 0571 88828
4X8FT cnc router 1325 wood carving equipment for wooden doorways,sculpture,cabinets,comfortable metal
Attribute:
- Ball screw for Z axis,it really is secure working and precision.
- X Y axis are equipment rack,it truly is steady managing,precision and quick.
- With NC studio manage technique,straightforward to find out layout software,ju EPT installed it onto your computer and commence producing styles.
- Weighty duty body and gantry,it truly is extremely sturdy and balance.
Specialized Parameter:
| Parameters | Standard Requirements |
| X Y Z axis functioning spot | 1300x2500x200mm |
| Spindle | three.5kw air cooling spindle |
| X Y Z traveling positioning accuracy | +-.01/2000mm |
| Table | Vacuum table or T.slot table |
| Vacuum pump | air cooling 5.5kw pump |
| X Y Z rail and transmission | ZheJiang TBI ball screw and equipment rack |
| Max.speedy travel rate | 50000mm/min |
| Max.doing work velocity | 30000mm/min |
| Spindle speed | 18000RPM |
| Driver motors | Stepper motor and motorists or servo motor and motorists |
| Operating voltage | 220V/380V/50HZ |
| Command language | G code |
| Control technique | NC studio or DSP/Mach3/Syntec |
| Software compatibility | Option:Artcam,Ucancam,Type3 |
| Managing setting | Temperature:~45ºC Relative humidity:thirty%~75% |
| Oil method | take care of |
| Body construction | Welding framework |
Application:
- Woodworking business:wood crafts,image frames chopping,handicraft carving wave plates,wooden doorway manufacturing and processing.
- Marketing sector:advertising and marketing materia EPT such as PVC,acrylic,double shade plate.
- Stone functioning business:these kinds of as all-natural marble,granite,artificial stone,tombstones,HangZhoupost,ceramic tile,glass and EPT components.
- Metallic business:carving aluminum,copper,stainless steel and other folks.
Package deal and Shipping:
Deal Depth:1)Exterior bundle:Standard plywood package.
2)Internal deal:Stretchy film and plastic film for humidity.
And we can package deal according yo your requests.
Delivery Depth:For common machines,it will be 7-fifteen doing work days soon after payment:For non-regular devices and personalized machines in accordance to clients’ specific demands,it will be 20-30 functioning days following payment.
Soon after Sale Service:
- Engineers offered to services machinery overseas.
- 1 yr ensure for entire equipment.
- Complex help by mobile phone,e mail,whatsapp and skype.If you have any difficulties,we will in twelve several hours to remedy it.
- You will be get totally free instruction guidance in direction of our equipment in our manufacturing facility.
- If you want any element of the device,we will offer the be EPT value for you.
- Helpful English variation manual and procedure video clip CD disk.
Organization details:
Artech is comprehensive in the production,design,production,trade and services of CNC equipment,and supply large good quality and excellent successful CNC devices throughout the world.With a powerful workers group,”Model Artech CNC”acquired good results in woodworking engraving equipment,promoting engraving machine,stone engraving machine,metallic engraving device,laser engraving device and laser chopping business tools.The generation services occupies China’s forefront in growth and enlargement.
FAQ:
Q1 For offer you the mo EPT appropriate device,how ought to i do?
- The specific materia EPT you want to engraver/lower?(this sort of as wood,acrylic,cloth,material,leather-based,metal…?)
- For the spindle energy,could i know the cutting or engraving depth you want?
- The functioning region you need?(these kinds of as max dimension of supplies,width*duration,1200*1200mm,1300*2500mm,2000*3000mm,etc)
- Do you want to engrave on planar&flat floor or round&curved surface?
If indeed,the machine shall be added optional items,this sort of as rotary attachment.If you can give some pictures of your merchandise,that would be excellent!After you explain to us these,we will ship you a lot more info about the equipment and price.
Q2.If we never know how to use the device,you can train us?
Yes,we will,if you arrive to China,we will provide you cost-free instruction till you can use machine freely.And if you are active,we will have the particular engineer to your region,but you want bear some fee,like tickets and lodge and metallic.
Q3.How about your after-sale provider?
We offer you you 24 hrs service mobile phone,skype,whatsapp and email.
This fall.How about your promise interval?
One particular calendar year and in the course of the time,if you have any questions,we will solve it for cost-free.
Customers Work:
Customer’s Opinions:
The use of unique products manufacturer’s (OEM) element quantities or trademarks , e.g. CASE® and John Deere® are for reference reasons only and for indicating product use and compatibility. Our organization and the outlined substitution components contained herein are not sponsored, approved, or created by the OEM.
China Roller chain and sprocket manufacturer Nylon 1962 Chain in Pune India Cable Chain Energy Cable Drag Chain for CNC Machine Tool with ce certificate top quality low price
We – EPG Group the largest Chain and agricultural gearbox factory in China with 5 various branches.
Innovative thermo treatment tools, this sort of as community heat treatment oven, multi-use thermo treatment oven, and so forth. ISO EPG has been effectively certified by ISO9002 Quality Management Technique, ISO9001 High quality Management System, API certification, ISO/TS16949:2002 and ISO10012 measurement management system. 9001:2015 qualified producer and distributor of roller chains. Types of roller chains incorporate ASME/ANSI normal chains, attachment chains, corrosion resistant chains, lube-cost-free chains, plastic chains, totally free-circulation chains, specialty chains and British common chains. ASME/ANSI regular chains are obtainable in huge and little pitch, double pitch and leaf designs. Roller chains are used in meals packaging, forklift vehicles, oilfield drilling, bikes, conveyors and electricity transfer applications. roller chains. Conveyor chains, engineered chains, silent chains, and tabletop chains are also offered. Other electricity transmission items consist of pillow blocks, conveyor idlers, conveyor pulleys, generate shafts, equipment racks, equipment reducers, gears, overrunning clutches, motor bases, pulleys, screw conveyors, shaft couplings, sheaves, speed reducers, sprockets, tapered bushings, tensioners, torque limiters, and universal joints. Companies these kinds of as bearing reconditioning and fix, ball screw mend, personalized agreement machining, gearbox repair and overrunning clutch mend providers are available. Roller chains can be employed in conveyor and equipment producing, industrial processing, device rebuilding, waste water, sand and gravel, tool and die, steel, metals and scrap processing industrial programs. Shut Cable Chains
Specification:
· Enclosed structure
· low noise
· high load resistant
· chemical, water and temperature resistant
Item description:
Software:
(1)Applies in the event in which reciprocating motion is used which has traction and defense to the created-in cable, tubing, the trachea and conduit, etc
(2) Drag chain has been broadly utilised in the numerical handle equipment resources, digital equipments, stone equipment, glass equipment, the injection molding machine, robots, over weight transportation equipments, computerized warehouses, and so on.
| Part No. | Interior | Internal | Outer | Outer | Bending radius |
| height | width | top | width | ||
| (mm) | (mm) | (mm) | (mm) | R(mm) | |
| GNFBQH4550-1 | 45 | fifty | sixty five | 85 | R75R100R125R150R200 |
| GNFBQH4560-one | 45 | sixty | 65 | 95 | R75R100R125R150R200 |
| GNFBQH4575-one | forty five | 75 | 65 | one hundred ten | R75R100R125R150R200 |
| GNFBQH45100-1 | 45 | one hundred | 65 | a hundred thirty five | R75R100R125R150R200 |
| GNFBQH45125-1 | forty five | one hundred twenty five | sixty five | 160 | R75R100R125R150R200 |
| GNFBQH45150-1 | 45 | one hundred fifty | sixty five | 185 | R75R100R125R150R200 |
| GNFBHK4550-2 | forty five | 50 | 66 | 78 | R100/R125/R150/R175/R200/R225/R250/R300 |
| GNFBHK4570-two | forty five | 70 | sixty six | 98 | R100/R125/R150/R175/R200/R225/R250/R300 |
| GNFBHK4575-two | 45 | seventy five | 66 | 103 | R100/R125/R150/R175/R200/R225/R250/R300 |
| GNFBHK4590-two | 45 | ninety | 66 | 118 | R100/R125/R150/R175/R200/R225/R250/R300 |
| GNFBHK45100-two | 45 | a hundred | 66 | 128 | R100/R125/R150/R175/R200/R225/R250/R300 |
| GNFBHK45125-2 | forty five | a hundred twenty five | sixty six | 153 | R100/R125/R150/R175/R200/R225/R250/R300 |
| GNFBHK45150-2 | 45 | one hundred fifty | 66 | 178 | R100/R125/R150/R175/R200/R225/R250/R300 |
| GNFBHK45175-two | forty five | one hundred seventy five | sixty six | 203 | R100/R125/R150/R175/R200/R225/R250/R300 |
| GNFBHK45200-two | forty five | 200 | 66 | 228 | R100/R125/R150/R175/R200/R225/R250/R300 |
| GNFBHK4550-one | 45 | fifty | 65 | eighty five | R75R100R125R150R200R250R300 |
| GNFBHK4560-1 | 45 | sixty | sixty five | ninety five | R75R100R125R150R200R250R300 |
| GNFBHK4575-1 | forty five | 75 | sixty five | one hundred ten | R75R100R125R150R200R250R300 |
| GNFBHK45100-1 | forty five | one hundred | 65 | 135 | R75R100R125R150R200R250R300 |
| GNFBHK45125-1 | forty five | 125 | sixty five | 160 | R75R100R125R150R200R250R300 |
| GNFBHK45150-one | forty five | 150 | sixty five | 185 | R75R100R125R150R200R250R300 |
Traits:
Mo EPT carriers have a rectangular cross section exactly where the cables lie in. Cross bars along with the length of the provider can be opened from the exterior, so that the cables can be easily inserted and connected with plugs.
Inside separators in the provider can separate the cables. Mounting brackets repair the finishes of the provider to the machine.Besides, cable carriers generally only permit bending in a single path.
In mixture with rigid mounting of the ends of the carrier, this can completely stop the enclosed cables from flopping in undesired directions and turning out to be tangled or crushed.
It has extremely beautiful visual appeal, so the product can make the equipment much more beautiful.
It is of substantial sturdiness, about 500 million reciprocating motions below regular circumstances.
It can be very easily mounted and dismantled, you ju EPT need a flat mouth screwdriver to open it and dismantle it.
It can run with large speed, below typical situation, it can attain to 5m/s.
Doing work temperature:-40-250 centigrade
Substance:PA
Package deal and Transportation:
The goods are wrapped by plastic woven cloth. Thorough packing can be according to your need. We will pack and ship the products very carefully and produce it as quickly as feasible.
Our Provider
Very good Service : Our aim is to provide you with courteous, expedient, skilled service of the highe EPT caliber.Our services is obtainable for seven twenty-four! Free of charge samples can be prepared for our customers, and the goods you get would be as same as the samples. We will hold regular relationship with our consumers after product sales and look forward to further cooperation.
Excellent Quality: We are expert in plastic hose discipline. We have rigid top quality manage system and very good popularity in mainland and world-wide marketplaces.
Fa EPT & Inexpensive Delivery: We have big price reduction from the forwarder simply because of long-expression cooperation.
No business is tiny business, so tiny orders are also welcomed listed here.
The use of original gear manufacturer’s (OEM) portion figures or emblems , e.g. CASE® and John Deere® are for reference needs only and for indicating item use and compatibility. Our company and the detailed substitute parts contained herein are not sponsored, approved, or created by the OEM.
China Roller chain and sprocket manufacturer Industrial roller chain sizes in Angeles City Philippines Chain Supplier Power Transmission Roller Chain Industrial Machine Chains with ce certificate top quality low price
We – EPG Group the largest Chain and agricultural gearbox factory in China with 5 various branches.
At any time-Electrical power Team CO., LTD. IS Specialist IN Making ALL Sorts OF MECHANICAL TRANSMISSION AND HYDRAULIC TRANSMISSION LIKE: PLANETARY GEARBOXES, WORM REDUCERS, IN-LINE HELICAL Equipment Speed REDUCERS, PARALLEL SHAFT HELICAL Equipment REDUCERS, HELICAL BEVEL REDUCERS, HELICAL WORM Gear REDUCERS, AGRICULTURAL GEARBOXES, TRACTOR GEARBOXES, Automobile GEARBOXES, PTO Travel SHAFTS, Special REDUCER & Associated Gear Components AND OTHER Associated Goods, SPROCKETS, HYDRAULIC Method, VACCUM PUMPS, FLUID COUPLING, Equipment RACKS, CHAINS, TIMING PULLEYS, UDL Pace VARIATORS, V PULLEYS, HYDRAULIC CYLINDER, Gear PUMPS, SCREW AIR COMPRESSORS, SHAFT COLLARS Minimal BACKLASH WORM REDUCERS AND pto shaft, agricultural gearboxes SO ON. Normal Our main goods are chain , gears, sprocket, Needle Roller bearings, Cylindrical Roller Bearings, Rod conclude Bearings, Spherical basic bearings, Monitor roller Bearings for Guideway, Roller Bearings, Combine Bearings for forklifts, Water Pump Bearings, SNR Automobile Bearings and all types of Spherical Bearings. strands have an even variety of pitches, pin backlinks, and roller hyperlinks. A roller chain strand can be shortened by getting rid of backlinks and lengthened by including complete or a 50 percent back links (offset backlinks). Roller Chain Components Every single chain is connected at the finishes to form a comprehensive circle or chain loop by a master connecting hyperlink. Cotter plates or spring clips hold the connecting link’s pins from doing work unfastened.
industrial chain supplier electricity transmission roller chain industrial equipment chains
Item Description
|
Merchandise Name |
StHangZhourd transmission Roller Chains |
Model |
Sequence A, Series B |
|
Row |
Simplex/Duplex/Triplex |
Software |
EPT Components |
|
Surface Therapy |
Self-coloration/sand-blasted/shot-peening |
Certification |
ISO, ANSI, DIN, BS |
|
Packing |
Packaged in bins and wooden instances, or packaged in ree EPT and then on pallets. |
Port |
Any sea port or airport in China |
A Sequence: 25, 35, 41, 40, 50, 60, 80, one hundred, one hundred twenty, a hundred and forty, 160
B Sequence:03B,04B,05B,06B,08B,10B,12B,16B,20B,24B,28B,32B.
|
Chain |
Pitch |
Roller |
Width |
Pin |
Pin |
Inner |
Plate |
Breaking |
|
|
|
P |
d1 |
b1 |
d2 |
L |
Lc |
h2 |
t/T |
Q |
|
mm |
mm |
mm |
mm |
mm |
mm |
mm |
mm |
kN |
|
|
*25SS |
6.350 |
three.thirty |
three.18 |
two.31 |
seven.9 |
8.4 |
six.00 |
.eight |
two.5/568 |
|
*35SS |
9.525 |
five.08 |
four.77 |
three.fifty eight |
twelve.4 |
13.seventeen |
9.00 |
one.30 |
five.5/1250 |
|
40SS |
12.700 |
7.95 |
7.eighty five |
three.96 |
sixteen.6 |
seventeen.eight |
12.00 |
1.50 |
9.6/2182 |
|
41SS |
twelve.seven-hundred |
seven.77 |
six.25 |
three.fifty eight |
thirteen.75 |
fifteen. |
9.91 |
one.30 |
six./1360 |
|
50SS |
fifteen.875 |
ten.16 |
9.40 |
five.08 |
twenty.7 |
22.two |
15.09 |
2.03 |
fifteen.2/3455 |
|
60SS |
19.050 |
eleven.ninety one |
twelve.fifty seven |
five.ninety four |
25.9 |
27.seven |
eighteen.00 |
two.42 |
21.7/4932 |
|
80SS |
25.four hundred |
fifteen.88 |
15.seventy five |
7.92 |
32.seven |
35. |
24.00 |
3.25 |
38.9/8841 |
|
100SS |
31.750 |
19.05 |
18.90 |
9.fifty three |
forty.four |
44.seven |
thirty.00 |
four.00 |
sixty./13636 |
|
120SS |
38.100 |
22.23 |
25.22 |
eleven.ten |
50.three |
54.three |
35.70 |
four.80 |
seventy two.5/16477 |
|
140SS |
44.450 |
twenty five.forty |
twenty five.22 |
12.70 |
fifty four.four |
fifty nine. |
forty one. |
5.sixty |
ninety four./21363 |
|
04BSS |
six.000 |
four.00 |
two.80 |
one.85 |
6.eighty |
7.eight |
5.00 |
.sixty |
two./455 |
|
05BSS |
eight.000 |
5.00 |
three.00 |
two.31 |
8.20 |
eight.9 |
seven.10 |
.eighty |
3.5/795 |
|
#06BSS |
9.525 |
six.35 |
five.seventy two |
3.28 |
13.fifteen |
fourteen.1 |
8.twenty |
one.30 |
6.2/1409 |
|
08BSS |
twelve.seven-hundred |
8.fifty one |
7.seventy five |
four.forty five |
sixteen.seven |
18.two |
eleven.80 |
1. |
twelve./2727 |
|
10BSS |
fifteen.875 |
ten.sixteen |
9.65 |
5.08 |
19.five |
twenty.9 |
fourteen.70 |
one.70 |
fourteen.5/3295 |
|
12BSS |
19.050 |
twelve.07 |
11.sixty eight |
5.seventy two |
22.5 |
24.two |
16.00 |
1.eighty five |
eighteen.5/4205 |
|
16BSS |
25.four hundred |
15.88 |
17.02 |
eight.28 |
36.one |
37.four |
21.00 |
4.fifteen/3.one |
forty./9091 |
|
20BSS |
31.750 |
19.05 |
19.fifty six |
10.19 |
41.3 |
forty five. |
26.40 |
four.5/3..5 |
fifty nine./13409 |
|
24BSS |
38.one hundred |
twenty five.40 |
25.forty |
14.sixty three |
53.4 |
57.eight |
33.20 |
6./4.eight |
104./25454 |
|
32BSS |
50.800 |
29.21 |
thirty.99 |
17.81 |
66. |
seventy one. |
42.00 |
7./6. |
a hundred and fifty./34090 |
The use of original products manufacturer’s (OEM) portion figures or emblems , e.g. CASE® and John Deere® are for reference needs only and for indicating item use and compatibility. Our firm and the listed substitution areas contained herein are not sponsored, authorized, or manufactured by the OEM.
Automatic made in China – replacement parts – in Austin United States Uprights Pallet Rack Post Roll Forming Machine with Factory Price with ce certificate top quality low price
We – EPG Team the bigge EPT Chain and agricultural gearbox factory in China with 5 various branches. For a lot more specifics: Cell/whatsapp/telegram/Kakao us at: 0086~13083988828 13858117778 0571 88828
Uprights Roll Forming Equipment
Feeding Material Xihu (We EPT Lake) Dis.
Main Machine
With feeding materials information, entire body frame made from H450 type steel by welding
Aspect wall thickness: Q235 t18mm Tie rod:ф22 Galvanized
Rollers manufactured from Gcr15 metal,CNC lathes,Warmth Treatment,tough Chrome Coated
with thickness .04mm,floor with mirror therapy
The guarantee for the rollers is 2 years
Shafts Diameter=ф80 mm,precision machined
Gear/Sprocket driving,about 10-stage to form
Major Motor=15KW , Frequency speed management
Speed redcucer motor:K series
Dimensions shifting motor:6pcs, Automatically managed by PLC Programing.
Sliding block:a hundred and fifty*150mm
All the screw bolts with quality 8.eight
Real forming speed 22m/min (depending on the number of punching holes)
With squareness roller set up
Publish- EPT Decoiler
Post to cut, cease to reducing,Two parts sort of chopping blade style, no blanking
EPT motor:7.5KW,with Hydrualic Pre-Chopping&Punching Device Share a hydraulic station
Chopping device materials: Cr12Mov(= SKD11 with at lea EPT one million moments of reducing existence), Heat remedy to HRC58-62 degree
The cutting electricity is offered by the main engine hydraulic station
PLC Manage Technique
Manage The Quantity And Cutting Size Routinely
Input The Creation Knowledge(Manufacturing Batch,pcs,Length,etc.)On The Touch Display screen ,
It Can End The Manufacturing Immediately.
Merged With: PLC, Inverter, Contact Display, Encoder, and many others
PLC:Siemens (German brand name)/Schneider(French brand)
Inverter:Siemens (German brand name)/Schneider(French brand name)
7-Inch Color Contact Display:Siemens (German brand)/Schneider(French model)
Encoder: Omron (Japan manufacturer)
Change Base, Point out Light-weight, Electricity Offer, Intermediate Relay, AC Contactor,
Thermal Relay: Siemens(German brand name)/Schneider(French manufacturer)
Air Change: LG-LS(Korea manufacturer)
Lower-to-Duration Tolerance≤±1 mm
Manage Voltage 24V
After-Sale Support
one. The warranty is 24 months after the client receives the machine.
Within The 24months, we will courier the replacement parts to the client
free of charge
two.We offer technical support for the entire life of our machines
three. We can send our technicians to install and train the workers in the clients’ factories with extra cost
Phrases Of Trade
one.Minimum order quantity (MOQ): 1 Set
2.Delivery time: about 45 workdays
3.Port of loading: port of HangZhou
4.Type of payment: by T/T or by L/C
5.Export:to much more than sixty nations and locations, which includes ZheJiang , Uk, France, Singapore,
Greece, Australia, USA, Mexico, Brazil, Chile, Xihu (We EPT Lake) Dis.by way of, Trinidad, Israel, Saudi Arabia, and so on
Packing Fashion
Packing method: Main physique of equipment is bare and lined by plastic movie(to safeguard of du EPT and corrosion),
loaded into container and steadily fixed in container suited by steel rope and lock, suitable for extended-length transportation.
Making time: about 50 workdays after acquired the advance payment
Packing technique: with nude packing steadily fastened in one particular 40 toes container suitable for
long-distance transportation
ABO EPT US
Manufacturer FORMING EPT CO.,LTD
HangZhou BMS Constructing Technological innovation CO.,LTD(BMS)
EXHIBITION
Factory
Buyer
Top quality IS OUR Culture!
WITH US YOUR Income IN Risk-free,
YOUR BUINESS IN Secure!
IF U ARE Intrigued OUR MACHINES
PLEASE Speak to WITH ME!
The use of original tools manufacturer’s (OEM) part numbers or emblems , e.g. CASE® and John Deere® are for reference functions only and for indicating product use and compatibility. Our firm and the detailed substitution elements contained herein are not sponsored, approved, or manufactured by the OEM.
Timing Cost made in China – replacement parts – in Pune India Pulley SPA 06 European Standard Pricecast Iron Transmission Tensioner Belt Best Sale Ace Hob Cutter Machine Parts Manufacture Timing Pulley with top quality
We – EPG Group the bigge EPT gearbox & motors , vee pulleys, timing pulleys, couplings and gears factory in China with 5 different branches. For more details: Mobile/whatsapp/telegram/Kakao us at: 0086~13083988828 13858117778 0571 88828
Timing pulley priceca EPT iron transmission machine parts manufacture be EPT sale ace tensioner belt hob cutter SPA/06 european standard timing pulley
In power transmission, belts are flexible loops of material that can link two rotating shafts mechanically and transmit power between them. Belts are also the primary component in belt drives, where one or more continuous belts are fitted over two pulleys at two shafts and rotary motion is transferred from the driving pulley to the driven pulley.
As compared to chain drives and gear drives, belt drives run quietly and smoothly and do not need lubrication. Maintenance is also comparatively convenient, and the driven shaft speed can be easily altered by changing pulley sizes.
The mo EPT common types of belts are V-belts and timing belts. V-belts are the mo EPT common type of belt today, and as their name suggests, their cross-sectional shape comes in the form of a “V”. Generally endless, the “V” cross-sections of these belts lodge in the mating grooves of their corresponding V-belt pulleys, preventing slipping due to under-tensioning. In general, V-belts require less width and tension compared to flat belts.
Timing belts are toothed belts that enable positive drive. They have rows of interlocking teeth that fit securely with a toothed pulley to avoid slipping. Timing belts require less tension than EPT belts, have no slippage, and do not require lubrication, however their power capacity is lower than V-belts and chains. They are frequently used in camshafts of automobiles and crankshafts.
We – EPG Group the bigge EPT gearbox & motors , vee pulleys, timing pulleys, couplings and gears factory in China with 5 different branches. For more details: Mobile/whatsapp/telegram/Kakao us at: 0086~13083988828 13858117778 0571 88828
The use of original equipment manufacturer’s (OEM) part numbers or trademarks , e.g. CASE® and John Deere® are for reference purposes only and for indicating product use and compatibility. Our company and the listed replacement parts contained herein are not sponsored, approved, or manufactured by the OEM.
